Products

  • 2JZ-JM Mechanical diaphragm metering pump
    Mechanically actuated metering pumps, are driven by a motor, worm gears, drive shaft, eccentric and piston. The motor speed is first slowed or reduced down to a desired stroking speed using worm gears. These worm gears are what will then turn the drive shaft at a desired speed and the drive shaft will turn an eccentric which is a type of cam; this ultimately provides the stroking motion of the piston. If you're pumping a dangerous liquid, or a liquid that must not be contaminated in anyway, consider a  mechanically actuated diaphragm metering pump.
  • Air pulse damper
    Air pulsation dampeners are available to enhance pump performance. Pulsation dampers are used for low-pulsation metering and to reduce the flow resistance with long metering lines. Our Pulsation dampers are available in different versions:Diaphragm type pulsation dampener , Air bag type pulse damper and air pulse.
  • airbag pulse damper
    Airbag type pulse damper
    Airbag type pulse damper are available to enhance pump performance. Pulsation dampers are used for low-pulsation metering and to reduce the flow resistance with long metering lines. Our Pulsation dampers are available in different versions:Diaphragm type pulsation dampener , Air bag type pulse damper and air pulse.
  • Carbon Steel Safety Valve
    Carbon Steel Safety Valves are widely used in chemical industry, water treatment, laboratory etc., also our Safety valve are suitable for air and various kind of corrosive liquids. Connection type Thread, flange etc. and can be customized Adjustable pressure 0-1.0MPa, 0-2.0MPa, 0-3.0MPa -details as per date sheet Safety test pressure 1.5 times the maximum input pressure Applicable temperature  -5℃to +80℃ for EPDM lining PTFE diaphragm -5℃to +120℃ for PTFE diaphragm Available materials Materials for Lower valve body PVC,SS304,SS316L, PTFE,PVDF,PP, carbon steel etc materials for diaphragm EPDM lining PTFE diaphragm,PTFE diaphragm Material for upper valve body PVC, carbon steel(nickel plated, black oxide etc.), SS304,SS316L
  • Diaphragm type pulse damper
    The Pulse dampers we manufactured mainly including Diaphragm type pulse damper , Air bag type pulse damper and air pulse .Our Pulse dampers are widely used in chemical industry, water treatment, laboratory oil industry etc., also Pulse dampers are suitable for air and various kind of corrosive liquids. Pulsation dampers have an equalising effect. They are used to ensure low-pulsation metering. Connection type Thread, flange etc. and can be customized Adjustable pressure PVC materials: 1.0MPa Stainless steel  / carbon steel: 2.5MPa, 5MPa and 10MPa Safety test pressure 1.5 times the maximum input pressure Applicable temperature  -5℃to +80℃ Available materials Materials for housing…
  • Flow calibration column
    Flow calibration column  is widely used in the flow calibration of metering pump and dosing device which can calibrate the output flow accurately. Type: Jacket type, common type Materials for tube: transparent PVC, quartz glass (small volume); Materials for connector: PVC, Stainless steel, carbon steel etc. Connection type: internal thread, external thread, flange
  • GM Mechanical diaphragm metering pump
    GM mechanical diaphragm metering pump are robust and reliable motor driven diaphragm metering pumps. The stroke length can be adjusted to alter capacity of this pump. Two non-return valves prevent the feed chemical from flowing back during pumping. Each pump with the reinforced plate to protect the diaphragm. Metering pump are very durable for processing all kinds of chemicals with wide flow rate range.
  • JT plunger metering pump
    Features of JT plunger metering pump: 1. The motor is installed vertically which is safe and leakage free. 2. Various types of insulation pump head are available (steam head, hot water head, electric heating head, etc.) 3. High precision one-way valve set is applied for import and export to ensure metering accuracy and liquidity effectively. … Continue reading "JT plunger metering pump"
  • JTM hydraulic diaphragm metering pump
    Hydraulical diaphragm metering pumps, have the same starting components, meaning they also use a motor, worm gears, and a drive shaft/eccentric/piston of some sort to accomplish the reciprocating motion. However, the piston (usually a plunger) does not come in direct contact with the primary diaphragm. Between the piston and the diaphragm is hydraulic fluid. The … Continue reading "JTM hydraulic diaphragm metering pump"
  • JX plunger metering pump
    JX plunger metering pump is a kind of reciprocating special volume pump, which can transport liquid without solid particles in a stepless range of 0-100% according to the needs of various technological processes. It is divided into plunger metering pump, hydraulic diaphragm metering pump and mechanical diaphragm metering pump JX plunger metering pumps are widely … Continue reading "JX plunger metering pump"
  • MiltonRoy metering pump
    Specification of MiltonRoy metering pump: Flow of single head: 1800l / h max. Discharge pressure: 12 bars max. Regulation ratio: 10:1 Steady state accuracy: + / – 2% The suction lifting height: 3M water column Inlet pressure: 2 bars max. Allowed temperature of materials:40 ℃ max. Features of MiltonRoy metering pump: Hydraulic end *The diaphragm … Continue reading "MiltonRoy metering pump"
  • Polypropylene(PP) Pressure Relief Valves DN6-DN125
    Polypropylene(PP) Pressure Relief Valves are widely used in chemical industry, water treatment, laboratory etc., also our Safety valve are suitable for air and various kind of corrosive liquids. Connection type Thread, flange etc. and can be customized Adjustable pressure 0-1.0MPa, 0-2.0MPa, 0-3.0MPa -details as per date sheet Safety test pressure 1.5 times the maximum input pressure Applicable temperature  -5℃to +80℃ for EPDM lining PTFE diaphragm -5℃to +120℃ for PTFE diaphragm Available materials Materials for Lower valve body PVC,SS304,SS316L, PTFE,PVDF,PP, carbon steel etc materials for diaphragm EPDM lining PTFE diaphragm,PTFE diaphragm Material for upper valve body PVC, carbon steel(nickel plated, black oxide etc.), SS304,SS316L
  • PTFE adjustable pressure relief valve
    PTFE adjustable pressure relief valve are widely used in chemical industry, water treatment, laboratory etc., also our Safety valve are suitable for air and various kind of corrosive liquids. Safety valve is generally installed on the equipment of closed system or pipeline to keep the system safety. Connection type Thread, flange etc. and can be customized Adjustable pressure 0-1.0MPa, 0-2.0MPa, 0-3.0MPa -details as per date sheet Safety test pressure 1.5 times the maximum input pressure Applicable temperature  -5℃to +80℃ for EPDM lining PTFE diaphragm -5℃to +120℃ for PTFE diaphragm Available materials Materials for Lower valve body PVC,SS304,SS316L, PTFE,PVDF,PP, carbon steel etc materials for…
  • PTFE Back Pressure Valve
    PTFE Back Pressure Valves / Pressure Relief Valves PTFE Back pressure valve is used to prevent liquid from flowing or siphoning due to Gravitation. At this time, the back pressure valve can reduce the flow due to siphon and control the pressure fluctuations. The back pressure valves we manufactured are widely used in chemical industry, water treatment, laboratory etc., also our back pressure valves are suitable for air and various kind of corrosive liquids. Connection type Thread, flange etc. and can be customized Adjustable pressure 0-0.3MPa,0-1.0MPa Safety test pressure 1.5 times the maximum input pressure Applicable temperature -5℃ to +80℃ for EPDM lining…
  • PVC Corrosion Resistant Safety Valve
    PVC Corrosion Resistant Safety Valves are widely used in chemical industry, water treatment, laboratory etc., also our Safety valve are suitable for air and various kind of corrosive liquids. They are a good low-cost solution for most flow control needs. PVC (Polyvinyl Chloride) offers an erosion and corrosion resistant material suitable for a variety of residential, commercial, and industrial valve uses Connection type Thread, flange etc. and can be customized Adjustable pressure 0-1.0MPa, 0-2.0MPa, 0-3.0MPa -details as per date sheet Safety test pressure 1.5 times the maximum input pressure Applicable temperature  -5℃to +80℃ for EPDM lining PTFE diaphragm -5℃to +120℃ for PTFE diaphragm…
  • PVC Series Back Pressure Valves
    All thermoplastic diaphragm Back Pressure Valve for chemical feed systems, applies back pressure to a metering pump to prevent siphoning and eliminates varying dosage rates resulting from fluctuating downstream pressure. When the preset pressure is exceeded, the diaphragm is forced up and chemical flows through the valve to the injection point. All valves are preset for 50 psi, but are field adjustable via the adjustment screw. Installation should be as close to the injection point as possible to prevent chemical line drainage and it is most important that all chemical system equipment such as pulsation dampeners and pressure gauges are…